top of page
2019-2028 RAM 3500 Bolt-On Traction Bars | Outlaw Fab

Whether you're cruising around town, hauling skid loaders to the job site or lining up at the drag strip, put your RAM's power to work with confidence. When torque hits, factory leaf springs can flex and allow the rear axle to twist, causing axle wrap, wheel hop and unnecessary stress on your drivetrain. Outlaw Fab Bolt-On Traction Bars help control that movement, keeping your rear axle planted and putting more of your truck's power to the ground instead of wasting it in suspension flex. Built for everyday miles and hard use, with the strength to back up the look.

 

Why Outlaw Fab? Compare the details.

  • Heavy duty is standard—not an upgrade. Every bar uses 2" tubing with a full 1/4" wall. We don't sell you a lightweight bar then charge extra to make it heavy duty.

  • 4" is big when 2" is average. Our heim joints feature 7/8" threads, a 3/4" bore and 4" threaded shanks—twice the length of the standard 2" shanks commonly used on traction bars. Paired with weld-in bungs featuring 4" of internal threads, they provide greater adjustability and available thread engagement to help resist pullout. Black zinc plating fights rust and corrosion.

  • Adjust them without taking them apart. Heims at both ends let you dial in preload and overall length without unbolting the bars from their mounts. Right-hand threads at one end and left-hand threads at the other make each bar work like a giant turnbuckle—simply turn the bar with a wrench and both heims adjust in or out together.

  • Through-bolts—not self-tappers. Every frame-mounting bolt passes through the frame and is secured with a locknut on the back side. No relying on self-tappers or thread-cutting bolts to hold your frame brackets in place when you're putting serious power to the ground.

  • 3/4" mounting bolts instead of 5/8". We use Grade 8 hardware, with massive 3/4" bolts connecting each bar to both mounts instead of the commonly used 5/8" bolts. Because the hardware holding everything together should be just as tough as the bars themselves.

  • Strength beyond the surface. Our CNC laser-cut and bent brackets are built from 1/4" Grade 50 steel for greater strength than ordinary mild steel. Detailed aluminum faceplates complete the look without sacrificing the heavy-duty steel construction underneath.

  • A solid axle connection—not a clamp-on shortcut. Why trust two-piece brackets that simply clamp around the axle housing and can slip or rotate when serious torque is applied? Our kits include a complete U-bolt flip setup with two new upper leaf-spring U-bolt mounting plates and four heavy-duty 5/8" square-bend U-bolts with a corrosion-resistant black electrocoat finish. Our axle brackets are secured through the leaf-spring mounting assembly, creating a solid connection designed to handle real power—not just look good underneath your truck.

  • Frame brackets matched to your lift. Select 0–8" lift and your kit includes our standard frame brackets. Select 8.5"+ lift and we include brackets with additional drop, lowering the frame mounting point to help maintain a better traction bar angle on taller trucks.

 

Factory Auto-Level Air Suspension Compatibility

Have factory auto-level rear air suspension? We've got you covered. Your RAM's factory air suspension uses ride-height sensors to monitor the rear suspension and automatically adjust air pressure when hauling or towing. Select the Factory Auto-Level Air Suspension option when ordering, and we'll include a specially designed upper U-bolt plate with an integrated ball stud for your factory ride-height sensor linkage. This provides the proper connection for your original sensor linkage, allowing your factory automatic leveling system to continue operating as intended. Keep the convenience of factory auto-leveling without sacrificing the strength of heavy-duty traction bars.

 

Powder Coat Options

Finish them your way with 13 powder coat options, including a custom color option that lets you choose your own powder from Prismatic Powders, Columbia Coatings or another powder supplier. All standard powder coat colors receive a clear coat for added protection and durability.

 

Custom color orders: Select your powder color before ordering and enter the powder supplier and exact powder color name. Include the powder product code or a product link when available. Do not enter your truck's automotive paint color or paint code. Custom colors must be actual powder coat colors.

 

Fitment

Fits 2019–2028 RAM 3500 trucks, from a reverse level up to 14" of lift.

  • Fits trucks with or without factory auto-level rear air suspension.

  • Fits single rear wheel (SRW) and dual rear wheel (DRW) configurations.

  • Available for standard and lifted applications.

  • Includes four black electrocoated 5/8" square-bend U-bolts.

  • Includes two new upper leaf-spring U-bolt mounting plates for the U-bolt flip setup.

  • Factory auto-level air suspension option includes a specially designed upper U-bolt plate with an integrated ball stud for the factory ride-height sensor linkage.

  • If your truck has factory auto-level rear air suspension, be sure to select that option when ordering to receive the correct mounting plate.

2019-2028 RAM 3500 Bolt-On Traction Bars | Outlaw Fab

$810.45Price
0/500
0/500
Quantity

Personalize your kit with optional faceplate upgrades.

Heading 1

Heading 1

Heading 1

Related Products

Please Note: Traction bar and suspension kits are built to order with a 5–9 week lead time. Once ordered, materials are ordered and cancellations are not accepted. Free shipping applies to the lower 48 only. Customers in Hawaii or Alaska, please contact us for a shipping quote before ordering.

©2025 by Outlaw Fabrication

bottom of page