top of page
2010-2013 RAM 2500 & 2010-2018 RAM 3500 Bolt-On Traction Bars | Outlaw Fab

Whether you're cruising around town, hauling skid loaders to the job site or putting serious horsepower to the ground at the drag strip or truck pulls, make sure your RAM's rear suspension can handle the power. When torque hits, factory leaf springs can flex and allow the rear axle to twist, causing axle wrap, wheel hop and unnecessary stress on your driveshaft, U-joints and drivetrain. Outlaw Fab Bolt-On Traction Bars help control that movement, keeping your rear axle planted and putting more of your truck's power to the ground instead of wasting it in suspension flex. Built for everyday miles and hard use, with the strength to back up the look.

Why Outlaw Fab? Compare the details.

  • Heavy duty is standard—not an upgrade. Every bar uses 2" tubing with a full 1/4" wall. We don't sell you a lightweight bar and charge extra to make it ready for work.

  • 4" is big when 2" is average. Our heim joints feature 7/8" threads, a 3/4" bore and 4" threaded shanks—twice the length of the standard 2" shanks commonly used on traction bars. Paired with weld-in bungs featuring 4" of internal threads, they provide greater adjustability and available thread engagement to help resist pullout. Black zinc plating fights rust and corrosion.

  • Adjust them without taking them apart. Heims at both ends let you dial in preload and overall length without unbolting the bars from their mounts. Right-hand threads at one end and left-hand threads at the other make each bar work like a giant turnbuckle—simply turn the bar with a wrench and both heims adjust in or out together.

  • Through-bolts—not self-tappers. Our frame brackets use through-bolts secured with locknuts on the back side instead of relying on self-tappers or thread-cutting bolts to hold everything together. The exception is 2010–2013 RAM 2500/3500 regular cab long bed trucks, where fuel tank clearance limits access. Rather than relying solely on thread-cutting bolts, we also use heavy-duty box bolts in the bottom two mounting holes for a more secure connection.

  • 3/4" mounting bolts instead of 5/8". We use Grade 8 hardware, with massive 3/4" bolts connecting each bar to both mounts instead of the commonly used 5/8" bolts. Because the hardware holding everything together should be just as tough as the bars themselves.

  • Strength beyond the surface. Our CNC laser-cut and bent brackets are built from 1/4" Grade 50 steel for greater strength than ordinary mild steel. Detailed aluminum faceplates complete the look without sacrificing the heavy-duty steel construction underneath.

  • A solid axle connection—not a clamp-on shortcut. Why trust two-piece brackets that simply clamp around the axle housing and can slip or rotate when serious torque is applied? Our kits include a complete U-bolt flip setup with two new upper leaf-spring U-bolt mounting plates and four heavy-duty 5/8" square-bend U-bolts with a corrosion-resistant black electrocoat finish. Our axle brackets are secured directly through the leaf-spring mounting assembly, creating a solid connection designed to handle real power—not just look good underneath your truck.

  • Frame brackets matched to your lift. Select 0–8" lift and your kit includes our standard frame brackets. Select 8.5"+ lift and we include brackets with additional drop, lowering the frame mounting point to help maintain a better traction bar angle on taller trucks.

Factory Auto-Level Air Suspension Compatibility

Have factory auto-level rear air suspension? We've got you covered. Select the factory air suspension option when ordering, and we'll include a specially designed upper U-bolt plate featuring an integrated ball stud for your factory ride-height sensor linkage. This allows the original sensor linkage to reconnect properly, maintaining the connection your truck needs to monitor rear suspension height and operate its automatic leveling system. No need to sacrifice your factory leveling functionality just to run heavy-duty traction bars.

Powder Coat Options

Finish them your way with 13 powder coat options, including a custom color option that lets you choose your own powder from Prismatic Powders, Columbia Coatings or another powder supplier. All standard powder coat colors receive a clear coat for added protection and durability.

Custom color orders: Select your powder color before ordering and enter the powder supplier and exact powder color name. Include the powder product code or a product link when available. Do not enter your truck's automotive paint color or paint code. Custom colors must be actual powder coat colors.

Fitment

Fits 2010–2013 RAM 2500 and 2010–2018 RAM 3500 trucks, from a reverse level up to 14" of lift.

  • Compatible with leaf-spring rear suspension.

  • Factory auto-level rear air suspension supported when the appropriate option is selected.

  • Available for standard and lifted applications.

  • Includes four black electrocoated 5/8" square-bend U-bolts.

  • Includes two new upper leaf-spring U-bolt mounting plates for the U-bolt flip setup.

  • Factory air suspension option includes an upper U-bolt plate with a ball stud for the original ride-height sensor linkage.

  • Regular cab long bed models from 2010–2013 use box bolts in the bottom two frame bracket mounting holes due to fuel tank clearance.

2010-2013 RAM 2500 & 2010-2018 RAM 3500 Bolt-On Traction Bars | Outlaw Fab

$881.35Price
0/500
0/500
Quantity

Personalize your kit with optional faceplate upgrades.

Heading 1

Heading 1

Heading 1

Related Products

Please Note: Traction bar and suspension kits are built to order with a 5–9 week lead time. Once ordered, materials are ordered and cancellations are not accepted. Free shipping applies to the lower 48 only. Customers in Hawaii or Alaska, please contact us for a shipping quote before ordering.

©2025 by Outlaw Fabrication

bottom of page