Whether you're cruising around town, hauling skid loaders to the job site or lining up at the drag strip, put your Dodge's power to work with confidence. When torque hits, factory leaf springs can flex and allow the rear axle to twist, causing axle wrap, wheel hop and unnecessary stress on your drivetrain. Outlaw Fab Bolt-On Traction Bars help control that movement, keeping your rear axle planted and putting more of your truck's power to the ground instead of wasting it in suspension flex. Built for everyday miles and hard use, with the strength to back up the look.
Why Outlaw Fab? Compare the details.
Heavy duty is standard—not an upgrade. Every bar uses 2" tubing with a full 1/4" wall. We don't sell you a lightweight bar then charge extra to make it heavy duty.
4" is big when 2" is average. Our heim joints feature 7/8" threads, a 3/4" bore and 4" threaded shanks—twice the length of the standard 2" shanks commonly used on traction bars. Paired with weld-in bungs featuring 4" of internal threads, they provide greater adjustability and available thread engagement to help resist pullout. Black zinc plating fights rust and corrosion.
Adjust them without taking them apart. Heims at both ends let you dial in preload and overall length without unbolting the bars from their mounts. Right-hand threads at one end and left-hand threads at the other make each bar work like a giant turnbuckle—simply turn the bar with a wrench and both heims adjust in or out together.
Through-bolts—not self-tappers. Every frame-mounting bolt passes through the frame and is secured with a locknut on the back side. No relying on self-tappers or thread-cutting bolts to hold your frame brackets in place when you're putting serious power to the ground.
3/4" mounting bolts instead of 5/8". We use Grade 8 hardware, with massive 3/4" bolts connecting each bar to both mounts instead of the commonly used 5/8" bolts. Because the hardware holding everything together should be just as tough as the bars themselves.
Strength beyond the surface. Our CNC laser-cut and bent brackets are built from 1/4" Grade 50 steel for greater strength than ordinary mild steel. Detailed aluminum faceplates complete the look without sacrificing the heavy-duty steel construction underneath.
Frame brackets matched to your lift. Select 0–8" lift and your kit includes our standard frame brackets. Select 8.5"+ lift and we include brackets with additional drop, lowering the frame mounting point to help maintain a better traction bar angle on taller trucks.
Rear Axle Selection – Dana 70 or Dana 80
Not sure which rear axle your Dodge has? Don't guess—grab a tape measure! These trucks were equipped with different rear axles, and selecting the correct one ensures your axle brackets fit properly.
The easiest way to check is to measure the distance between the inside edges of the factory U-bolts where they wrap around the rear axle housing.
3.5" measurement = Dana 70 rear axle
4" measurement = Dana 80 rear axle
You can also measure the outside diameter of the axle tube itself or check the axle identification tag. Don't rely solely on your truck's year, engine or transmission, as axle configurations can vary.
Please verify your rear axle before ordering to ensure you receive the correct mounting brackets.
Powder Coat Options
Finish them your way with 13 powder coat options, including a custom color option that lets you choose your own powder from Prismatic Powders, Columbia Coatings or another powder supplier. All standard powder coat colors receive a clear coat for added protection and durability.
Custom color orders: Select your powder color before ordering and enter the powder supplier and exact powder color name. Include the powder product code or a product link when available. Do not enter your truck's automotive paint color or paint code. Custom colors must be actual powder coat colors.
Fitment
Fits 1994–2002 Dodge Ram 2500 & 3500 trucks equipped with a Dana 70 or Dana 80 rear axle, from a reverse level up to 14" of lift.
Compatible with factory leaf-spring rear suspension.
Available for standard and lifted applications.
Dana 70 and Dana 80 axle-specific mounting brackets available.
Rear axle selection required when ordering.
Does not include replacement U-bolts. Longer U-bolts may be required depending on the existing hardware.


















