top of page
2023-2027 Ford F250 & F350 Bolt-On Traction Bars | Outlaw Fab

Whether you're cruising around town, hauling skid loaders to the job site or lining up at the drag strip, put your Ford's power to work with confidence. When torque hits, factory leaf springs can flex and allow the rear axle to twist, causing axle wrap, wheel hop and unnecessary stress on your drivetrain. Outlaw Fab Bolt-On Traction Bars help control that movement, keeping your rear axle planted and putting more of your truck's power to the ground instead of wasting it in suspension flex. Built for everyday miles and hard use, with the strength to back up the look.

 

Why Outlaw Fab? Compare the details.

  • Heavy duty is standard—not an upgrade. Every bar uses 2" tubing with a full 1/4" wall. We don't sell you a lightweight bar then charge extra to make it heavy duty.

  • 4" is big when 2" is average. Our heim joints feature 7/8" threads, a 3/4" bore and 4" threaded shanks—twice the length of the standard 2" shanks commonly used on traction bars. Paired with weld-in bungs featuring 4" of internal threads, they provide greater adjustability and available thread engagement to help resist pullout. Black zinc plating fights rust and corrosion.

  • Adjust them without taking them apart. Heims at both ends let you dial in preload and overall length without unbolting the bars from their mounts. Right-hand threads at one end and left-hand threads at the other make each bar work like a giant turnbuckle—simply turn the bar with a wrench and both heims adjust in or out together.

  • Through-bolts—not self-tappers. Every frame-mounting bolt passes through the frame and is secured with a locknut on the back side. No relying on self-tappers or thread-cutting bolts to hold your frame brackets in place when you're putting serious power to the ground.

  • 3/4" mounting bolts instead of 5/8". We use Grade 8 hardware, with massive 3/4" bolts connecting each bar to both mounts instead of the commonly used 5/8" bolts. Because the hardware holding everything together should be just as tough as the bars themselves.

  • Strength beyond the surface. Our CNC laser-cut and bent brackets are built from 1/4" Grade 50 steel for greater strength than ordinary mild steel. Detailed aluminum faceplates complete the look without sacrificing the heavy-duty steel construction underneath.

  • Built for your Ford—not a universal fit. With multiple rear axle configurations available on these Super Duty trucks, one-size-fits-all mounting brackets aren't good enough. We offer three axle-specific mounting configurations designed around your truck's rear suspension. No guessing, no universal clamp-on shortcuts—just heavy-duty components built for your setup. The kit is designed to work with your existing U-bolts, although some applications may require longer U-bolts depending on the available thread length.

  • Frame brackets matched to your lift. Select 0–8" lift and your kit includes our standard frame brackets. Select 8.5"+ lift and we include brackets with additional drop, lowering the frame mounting point to help maintain a better traction bar angle on taller trucks.

 

Rear Axle Selection – Choose the Correct Mounting Brackets

Not sure which rear axle your Ford has? Don't guess—count the bolts! These trucks can have different rear axles depending on their configuration and equipment. Choosing the correct axle option ensures you receive the proper mounting brackets.

The easiest way to identify your rear axle is to look at the rear differential cover (the large cover on the back of the axle housing) and count the bolts securing it.

  • 12-Bolt – Sterling 10.5": If your rear differential cover has 12 bolts, select the 12-Bolt option.

  • 14-Bolt or 16-Bolt Single Rear Wheel: If your truck has single rear wheels (SRW) and the differential cover has 14 or 16 bolts, select the 14/16-Bolt SRW option. This covers the Dana M275 (14-bolt) and Ford Sterling 11.6" (16-bolt) axle configurations.

  • 14-Bolt Dually: If your truck has dual rear wheels (DRW) and the differential cover has 14 bolts, select the 14-Bolt DRW option. This covers the Dana M300 rear axle.

Please verify your rear axle before ordering. Don't rely solely on your truck's year or whether it's an F250 or F350. If you're unsure, measure the axle tube diameter or contact us with a picture of your rear differential cover and we'll help you select the correct option.

 

Powder Coat Options

Finish them your way with 13 powder coat options, including a custom color option that lets you choose your own powder from Prismatic Powders, Columbia Coatings or another powder supplier. All standard powder coat colors receive a clear coat for added protection and durability.

 

Custom color orders: Select your powder color before ordering and enter the powder supplier and exact powder color name. Include the powder product code or a product link when available. Do not enter your truck's automotive paint color or paint code. Custom colors must be actual powder coat colors.

 

Fitment

Fits 2023–2027 Ford F250 & F350 Super Duty trucks, from a reverse level up to 14" of lift.

  • Fits gas and Power Stroke diesel models.

  • Available for standard and lifted applications.

  • Three rear axle mounting configurations available:

    • 12-Bolt Sterling 10.5"

    • 14/16-Bolt SRW

    • 14-Bolt DRW Dana M300

  • Rear axle configuration selection required when ordering.

  • Factory U-bolts can be reused if sufficient length is available. Longer U-bolts may be needed in some cases and are not included.

2023-2027 Ford F250 & F350 Bolt-On Traction Bars | Outlaw Fab

$831.95Price
0/500
Quantity

Personalize your kit with optional faceplate upgrades.

Heading 1

Heading 1

Heading 1

Related Products

Please Note: Traction bar and suspension kits are built to order with a 5–9 week lead time. Once ordered, materials are ordered and cancellations are not accepted. Free shipping applies to the lower 48 only. Customers in Hawaii or Alaska, please contact us for a shipping quote before ordering.

©2025 by Outlaw Fabrication

bottom of page